Visit the Martek Power web site

Tyco offers TMS 90 SCE heat-shrink marker sleeves

A Tyco Electronics UK product story
More from this company More from this category
Edited by the Electronicstalk editorial team May 4, 2009

Tyco Electronics has introduced a range of TMS 90 SCE heat-shrink marker sleeves, which meet the high-performance wire and cable marking needs of a number of industries.

These include aerospace, defence, marine, rail, mass-transit, industrial and electronics sectors.

The marker sleeves are designed to operate in high-temperature environments requiring high mechanical strength, protection from prolonged temperature exposure, and fluid resistance at high temperatures.

The marker sleeves are designed to operate in high-temperature environments requiring high mechanical strength, protection from prolonged temperature exposure, and fluid resistance at high temperatures.

The marker sleeves are designed to operate in high-temperature environments requiring high mechanical strength, protection from prolonged temperature exposure and fluid resistance at high temperatures.

The marker sleeves are made from durable, flame-retardant, radiation-cross-linked, heat-shrinkable, homopolymer-based polyolefin, with an operating temperature range of -55C to +135C.

These lightweight 3:1-shrink-ratio products provide fast shrinking and cover a range of wire diameters, thus simplifying inventory, according to the company.

Meeting the mark permanence requirements of SAE AS81531 and MIL-STD-202 standards, both before and after shrinking, marks are permanent immediately upon printing and remain legible even when exposed to abrasion, aggressive cleaning solvents and military fuels and oils.

TMS 90 SCE sleeves meet the performance requirements of the SAE-ASM-DTL-23053/5 class 1 standard and are UL listed and CSA certified.

Sleeves are available in diameters from 0.093in (2.4mm) to 1.5in.

Supplied in a thin, flat 'ladder' format, the sleeves are held horizontally between two hole-punched polyester strips.

The ladder format provides automatic kitting of the marker sleeves in the desired sequence.

Find out more about this article. Request a brochure, download technical specifications and request samples here.
Send to a friendSend to a friend

Not what you're looking for? Search the site.

Back to top Back to top

Contact Tyco Electronics UK

Contact Tyco Electronics UK

Tel+44 208 954 2356

Other Tyco Electronics UK stories

Contact Tyco Electronics UK
  • Paralight QDR cable assemblies run to 100 metres
    Tyco Electronics has released 40Gb/s Quad Data Rate (QDR) speed Paralight cable assemblies in a Quad Small Form-Factor Pluggable (QSFP) connector format.
  • Tyco announces PCB power connector
    The Stacked ICCON power connector from Tyco Electronics increases power densities in high-end data and telecommunications equipment.
  • Tyco enhances Val-u-lok connector range
    The Val-u-lok connector range from Tyco Electronics now includes housings that meet the requirements of IEC 60335-1 for glow-wire ignition temperature and glow-wire flammability index.
  • SMT connector powers LEDs from underside of board
    Tyco has introduced the SMT thru-board connector, which supplies power from the underside of an FR4 or aluminium-clad PC board, eliminating issues of dressing wires on the top side of LED boards.
  • AMP Netconnect launches unloaded patch panels
    A range of flush-mount modular unloaded patch panels for use in network cabling systems has been released by the AMP Netconnect business unit of Tyco Electronics.
Newsletter sign up

Request your free weekly copy of the Electronicstalk email newsletter ...

Visit the Martek Power web site
A Pro-talk Publication

A Pro-talk publication