Leading experts in embedded software development
Click on the advert above to visit the company web site

Product category: Intellectual Property Cores
News Release from: MoSys | Subject: 1T-SRAM Classic Memory Macros
Edited by the Electronicstalk Editorial Team on 16 June 2005

Macros speed SoC static RAM integration

Register for the FREE Electronicstalk email newsletter now! News about Intellectual Property Cores and more every issue. Click here for details.

1T-SRAM Classic Memory Macros are a family of preconfigured high-density high-speed low-power memory macros using silicon-proven 0.13-micron cores

Available now from MoSys, 1T-SRAM Classic Memory Macros are a family of preconfigured high-density high-speed low-power memory macros using silicon-proven 0.13-micron cores. By offering this set of macros in addition to its custom-designed embedded memory products, MoSys' customers now have the advantage of off-the-shelf, silicon-proven 1T-SRAM memory for rapid integration of high-density embedded memory into their SoC designs.

MoSys' Classic Macros are available in both high-speed and low-power configurations, targeted at applications including performance computing, high-throughput data networking, portable mass storage as well as high volume consumer entertainment and wireless personal communications.

High-speed Classic macros are available in 1Mbit configurations with 32, 64 or 128bit bus widths.

Speeds of up to 266MHz are supported.

The low-power Classic macros are available in 1, 2 or 4 Mbit configurations, all with 32bit bus widths.

The low-power offerings can operate at frequencies up to 133MHz and feature standby power of less than 80uA/Mbit.

All Classic macros employ MoSys' patented TEC technology resulting in higher yields, greater reliability and lower soft-error rates.

'Since its introduction, MoSys' 1T-SRAM technology has enabled designers to achieve significant performance advantages and cost savings', said Karen Lamar, Vice President of Sales and Marketing at MoSys.

'By taking advantage of MoSys' preconfigured Classic macro offerings, our customers now enjoy shorter design cycles and reduced development costs, while still retaining all of the performance benefits they have come to expect when using MoSys' technology'.

MoSys' Classic macros are licensed on single project use basis, and allow customers to use multiple instances in their designs to achieve larger on-chip memory sizes.

Classic macros are targeted for use with multiple foundries including Chartered, SMIC and TSMC, initially on the 0.13-micron process node.

Classic macro deliverables include datasheets, simulation and timing models, layout phantoms, GDSII databases and test documentation.

'With the new Classic macros line, MoSys is offering its customers immediate access to the best combination of high-density, configurable bandwidth and low power in an embedded SRAM memory solution'.

'Through use of its proprietary 1T-Q (single transistor, quad density) bit cell instantiated in Classic preconfigured macros, MoSys delivers truly compelling embedded SRAM memory solutions for immediate use as a drop-in replacement for larger, less-power optimised embedded SRAMs'.

'With Classic macros onboard their consumer and communications SoCs, MoSys' customers greatly accelerate their time to market while saving engineering development costs, particularly for SoC designs with increasingly aggressive market windows', said Rich Wawrzyniak, Senior ASICs and SoC Analyst with Semico Research.

'MoSys' Classic macros family greatly benefits fabless companies that do not have the capital resources or longer SoC design windows required to invest in a fully customisable 1T-SRAM solution'.

'Classic macros enable MoSys' customers to get the best bang for their buck by getting to market faster with optimal performance and significant cost savings'.

For customers with embedded memory requirements outside the scope of the Classic macros, including projects in advanced deep submicron processes such as 90nm, MoSys continues to provide its customised embedded 1T-SRAM memory macros.

MoSys 0.13-micron 1T-SRAM Classic macros are available now with pricing on request.

Silicon characterisation reports will be available by September 2005.

? MoSys: contact details and other news
? Email this article to a colleague
? Register for the free Electronicstalk email newsletter
? NEW
? Electronicstalk Home Page

Related Business News

MathStar, Inc. Announces High Definition MPEG-2...
...Encoder IP Core for the Arrix(TM) FPOA. MathStar, Inc. , a fabless semiconductor company specializing in high-performance programmable logic, announced today the availability of the company's high definition MPEG-2 Encoder IP Core for the Arrix field programmable object array .

Cast Selects Avery Design Systems For...
...Pci Express Verification Ip. Semiconductor intellectual property provider CAST, Inc. today announced that it has begun using the PCI-Xactor test environment from Avery Design Systems to verify its current and future PCI Express IP cores.

Vsia Announces Release Of Qip Metric...
...Now Publicly Available With Hard Ip Extension. The VSI Alliance , the leading IP standards body for the electronics industry, today announced the Quality IP Metric version 3.0, which includes the hard IP extension, is now publicly available.

Gda Technologies Selected By Renesas Technology...
...For Pci Express To Amba Axi Bridge. Gda Technologies, Inc., a fast growing supplier of Intellectual Property and Electronic Design Services , today announced that Renesas Technology Corp., a leading semiconductor company, has selected GDA for development of a PCIE 2 AMBA AXI Bridge to be

System management tool starts at $1.20
Actel has introduced a new reference design for embedded applications that enables intelligent system and power management implementations starting at $1.20.

Search the Pro-Talk network of sites

Leading experts in embedded software development